Building IoT Applications
Iot : Building IoT Applications Program List
Program [1]
Arduino Program to take input from serial and on the led based on input.
Program [2]
Arduino program to fade the led bulb using for loop
Program [3]
Arduino program to connect a led through push button
Program [4]
Arduino program to change the blinking speed of led using the potentiometer
Program [5]
Arduino program to print all integer number from 0 to 99 using for loop
Program [6]
Arduino program to print odd numbers from 1 to 99
Program [7]
Arduino program to print odd numbers from 99 to 1
Program [8]
arduino program to interface buzzer with Arduino board to buzz on off with the delay of 1sec
Program [9]
Arduino program to Blink a Light Emitting Diode LED
Program [10]
Arduino program to print Hello word in LCD
Program [11]
Arduino program to run a counter and display in LCD
Program [12]
Arduino program to interface the sensor and led
Program [13]
Arduino program to sound the buzzer on press on push button for 1 second
Program [14]
Arduino program to interface buzzer with LDR and LED
Program [15]
Arduino program to create automatic street light control by using LDR sensor
Program [16]
Arduino program to read a integer number and print its table
Program [17]
Arduino program to print the square root of a given number
Program [18]
Design a night lamp using a LDR and a LED using Arduino Uno and find out the time delays associated in keeping ON the lamp
Program [19]
Design a counter using an atmega microcontroller (like ATMEGA328P) using Arduino to display the number of entries per day in an office.
Program [20]
Write a program to interface a temperature sensor (LM35) and water Nozzle with the Arduino.
Program [21]
Arduino program to interface led buzzer with Arduino or raspberry pi and turn ON LED for 2 second after every 3 second